Ak

AK

England

www.aksportscars.co.uk/  ‎ Kit form 5000€

Price : From 34,000€ to 70,000€

AK Sportscars Ltd is based in Peterborough in the UK specialising in the design and manufacture of one of the finest cobra kit recreations in the UK– the AK 427.  Although one of the biggest producers in the UK we have endeavoured to keep the company on a friendly basis.

Started in the mid 80’s and they produced around 40 kits per year.

They have four  different options for you to choose from .  Your choice will  depend on a number of factors including  your budget, the amount of time you have to spare and the amount of space you have in which to build your car.  The choices start with the basic body and chassis kit for which they offer two options. The “Standard” body/chassis kit is based on the early Jaguar XJ6/S running gear with the inboard rear brakes.  Or the most recent  “Generation II ” body/chassis kit which is based on the later Jaguar XJ40 running gear which have the outboard rear brakes.  Once you have made a decision on which of these you wish to start your build on we then offer a further two options the” Factory built Rolling Chassis” which gets you off to a flying start on your build or the “Fully Factory built car” which is registered and ready to drive away.

Standard Body/Chassis Kit
The Standard body/chassis kit is very comprehensive package. The chassis is designed to take the Jaguar XJ6/XJS running gear with the inboard rear brakes.  It is a ladder type chassis with partial backbone and full steel lowered floors.The body is pre-fitted to the chassis and all internal panels (inner wheel arches, tub and boot) bonded into place. The doors and bonnet are all pre-hung to ensure the correct fit. No fibreglass and resin skills required. Engine and gearbox mounts are welded to the chassis and roll bar mounts pre-fitted to customer requirements. The chassis is then powder coated as standard in satin black.

Generation II Body/Chassis Kit
This chassis is designed to take the later Jaguar XJ40 running gear with AK's own tubular top and bottom front wishbones  and rear bottom wishbones. The body is pre-fitted to the chassis and all internal panels (inner wheel arches, tub and boot) bonded into place. The doors and bonnet are all pre-hung to ensure the correct fit. No fibreglass and resin skills required. Engine and gearbox mounts are welded to the chassis and roll bar mounts pre-fitted to customer requirements. The chassis is then powder coated in satin black.

Rolling Chassis- Gets You Off To A Flying Start.
The rolling chassis is made up of our body/ chassis kit ( either the Standard or Generation II as per your specification), but supplied and fitted with all the running gear and other parts as listed to get you started with the basic mechanics in place your ready for the next stage of the build.

Factory Built AK 427 -
This is a "Standard" factory built AK 427. Ready to hit the open roads and 100% complete, registered and taxed.  It is always very difficult to say what is a "standard" car, what extras should be added to the car as a standard is a challenge,  we all have different tastes and all have a  vision of what our dream car looks like, for that AK have got a lot of options of avaliable